Products and Service concept
1. draw a basic sketch course
1.1 Learn how to use the tools in 3d cad program (Rhino, Matrix, Jewel cad) basic.
1.2 the learning tasks and the needs of our customers.
1.3 learning specifications and standards writing jewelry
1.4 learn various information in the design, such as metal type treatment, etc.
1.5 learn workpiece with embedded gemstones in various formats.
1.6 can with a simple cad workpiece manually.
2. draw a Sketch advance course
2.1 learn workpiece with intricate patterns.
2.2 the workpiece can have embedded various types of gemstones.
2.3 can be forming in several categories, such as rings, earrings, pendant, bracelet, etc.
2.4 learning tolerance the tolerance percentage is dressed in a bead sai. Mold. Print a standard eye balls.
2.5 real costing knowledge on the needs of the customer.
3. draw a Sample Course advance and Mold
3.1 printing graphics formats can be of various types ( Ring, earring, pendant, bracelet, necklace, Bracelet)
3.2 printing can be made from metal, graphics.
3.3 can do real examples from print, metal.
3.4 cost can be calculated from actual samples.
4. in order to make Process Course (according to the instructions below).
4.1 analysing and defining the raw material (metal, stone, texture, finding, skin...ets.)
4.2 selection of forming metal print parts and manufacturing processes.
4.3 selection of raw materials, in printed format.
4.4 defining procedures for forming
4.5 to disassemble are considered and the number of prints.
4.6 consider installing water rods, metal
4.8 print solution considerations Repair and adjusting the
4.9 analysis of the impact of the manufacturing process.
4.9.1 casting process and pump.
4.9.2 the production process grinding up consists of doing the following Ron media.
4.9.3 welding/Assembly production flow spare parts.
4.9.4 step put the gem stones embedded in wax by category.
4.9.5 power polished steps.
4.9.6 step plating coating
4.9.7 the packing procedure.
5.Stone in Wax setting technique Course (a technique to embed ploy that Tian)
5.1 selection of metal forming type job embedded gemstones in Tianjin.
5.2 defining step forming type embedded derivatives in Tianjin
5.3 considering installing water rods, metal
5.4. analysis of the impact of the manufacturing process.
5.5 the production and control of the whole system.
6.Jewelry process and management system (management system and manufacturing process)
6.1 planning and production control.
6.2 determining raw materials and production process.
6.3 to determine the functions and structure of document system.
6.4 concerning the effects of the production process with 7 graphs techniques.
6.5 to manage the overall production costs.
Designer trainers with teaching ..... national and export factory executives jewelry exports all over the world.
Preparing to teach, then only 9.00 16.00-Sunday at noon.
1. the core service with chest graphic.
1.1 design by jewel cad, rhino, 30-hour basic course sketch/metrix 15000 baht.
1.2 design by jewel cad, rhino, sketch/30 hour course advance metrix 15000 baht.
1.3 Design by jewel cad, rhino, 12 HR metrix sample course & mold/10000 THB.
You can get unlimited degree 5 people per course.
* Graduated with plenty of support.
2. the manufacture of jewelry.
Order to make Process 2.1.12 hours/3000 baht.
2.2 design Wax technique set. 12 hours/5000 baht.
Jewelry management system & process 2.3.12 hours/5000 baht.
You can get unlimited degree 5 people per course.
... For a group supervisor or owner.
Open book course from today onwards ...
Ask your inbox..0918078228 san ...
Bangkok Bank branch big c OM Yai ..012-0-9-59395 phanu สฤษฏิ์. Juicy words.
http://san5882.blogspot.com/2013/11/wax-setting-process.html
ไม่มีความคิดเห็น:
แสดงความคิดเห็น