3D wax piecesTHE NEW GENERATION
Sensitive to all market requests, Riacetech has developed a wax injection process based on hydro soluble support.
It will be possible to realize 3D filigreed and hollow objects using normal and standard wax and over going the removal boundary of the interior part of the mold.
Main advantages compared to the Prototype technique:
• Inexpensive for bigger productions (the cost of the Hydroresin if 5 times lower).
• Final wax piece avoiding melting problems of resins.
• Number of pieces per day which can be made over any prototype.
• Dissolving Hydroresin into water (no acids) and without any draining problems.
• Completely non-toxicity.
• Using one of our standard injectors (no adding cost for special machinery).
Step in process
1.Inject some Hydroresin into mould n. 1
2.Put into mould n. 2 the piece we have obtained by using Hydroresin
3.Injection of the wax
4.Extraction of the wax piecewith the Hydroresin core
5.Diving the piece into some cold water: the Hydroresin core dissolves.
6.Obtaining in-Hallow Wax piece
http://www.riacewax.com/riacetech/en/3d-hydro-process.html
ไม่มีความคิดเห็น:
แสดงความคิดเห็น